NovuSoft

Hardware

NVS RF Terminal

Wireless meters broadcast their telegram on their own; the job is catching it. The RF handheld terminal plugs into a laptop and collects the telegrams of every meter that comes into range as you walk the floors — reading finishes without entering a single flat.
NVS RF Terminal — wM-Bus RF handheld terminal

$240

Export sale · VAT exempt

USD list price. Orders shipped outside Türkiye are invoiced in USD and are VAT exempt as an export sale; customs duties and import taxes are the buyer's responsibility. We ship worldwide.

Connection
868 MHz RF · USB
Installation
Portable · field
Order form

What it does

NVS RF Terminal

The behaviour that finishes the job on site.

Read without entering the flat

Even when the meter sits inside the flat, the telegram reaches outside. Appointments, knocking on doors and empty flats stop being a problem.

Collect while walking

The terminal accumulates every telegram that comes into range. Walking the floors is enough to finish a whole block.

Decodes encrypted telegrams

If the meter broadcasts with an AES key, the key is registered and the telegram is decoded and read.

Doubles as a coverage survey

Before installing a permanent RF collector, measure which meters are heard from which point — so the collector goes in the right place.

Where it fits

Where it fits

The right device follows the project's infrastructure.

Suitable

  • Periodic reading of wireless meters that broadcast wM-Bus
  • Coverage survey before installing a permanent collector
  • Reading in buildings where flats cannot be entered
  • Re-reading meters the RF collector cannot hear

Not suitable

  • Wired M-Bus meters — use the USB M-Bus converter
  • Remote reading from the office; the terminal is carried on site
  • Meters read over a LoRaWAN network

Specification

Specification

Technical values are confirmed before ordering.
Protocol
wM-Bus — EN 13757-4, OMS profile
Frequency
868 MHz
Modes
T · C · S
Interface
USB (virtual COM port)
Power
Bus-powered over USB
Encryption
AES-128 keyed telegram decoding
Software
NovuSoft meter tools

Installation

Installation

Commissioned in four steps.
  1. Plug the terminal into a USB port.

  2. Set the mode (T, C or S) in the NovuSoft tool and register AES keys if needed.

  3. Start listening and walk the floors.

  4. Push the collected telegrams into the project; meters still missing stay on the list.

Questions

NVS RF Terminal — frequently asked

Are all brands of wireless meter readable?

Meters broadcasting EN 13757-4 / OMS telegrams are read. Devices using a closed, manufacturer-specific protocol fall outside that — the telegram structure is checked before commissioning.

What is the range?

Range depends on the building — concrete shear walls, lift shafts and metal cabinets all weaken the signal. A measurement taken from the landing shows the real coverage.

Where do we get the key for encrypted meters?

The AES key comes from whoever sold or installed the meter. Without it the telegram is seen but its contents cannot be decoded.

Do collected readings feed the bill?

Yes. The telegram is matched to the meter in the project, written to the archive and enters the period's bill under the same rules — no different from a remote reading.

Order form

Request a quote for this product

Fill in the form with product, quantity and delivery details and we will come back with a price. Depending on project size we include installation and commissioning support in the quote.