Compatible meters
Do we read the meter you already have?
25
brands read regularly
For a device not on the list we check the telegram structure and answer definitively.
Contact usCompatible meters
Brands we read
- QDS
Qundis
Heating · Water · Allocator
- M-Bus
- wM-Bus
- ZRI
Zenner
Heating · Water
- M-Bus
- wM-Bus
- TCH
Techem
Heating · Water · Allocator
- M-Bus
- wM-Bus
- IST
ista
Heating · Water · Allocator
- M-Bus
- wM-Bus
- KAM
Kamstrup
Heating · Cooling · Water
- M-Bus
- wM-Bus
- ZRI
Minol
Heating · Water · Allocator
- M-Bus
- wM-Bus
- DNF
Danfoss
Heating · Cooling
- M-Bus
- wM-Bus
- EFE
Engelmann
Heating · Cooling · Water
- M-Bus
- wM-Bus
- LUG
Siemens
Heating · Cooling
- M-Bus
- HYD
Sharky
Heating · Cooling
- M-Bus
- wM-Bus
- BYL
Baylan
Water
- M-Bus
- wM-Bus
- CEM
CEM / Yavuz Metal
Water
- M-Bus
- wM-Bus
- LUG
Landis+Gyr
Heating · Electricity
- M-Bus
- RS-485
- HNY
Honeywell
Heating · Water
- M-Bus
- wM-Bus
- SEN
Sensus
Heating · Water
- M-Bus
- wM-Bus
- APA
Apator
Heating · Water
- M-Bus
- wM-Bus
- INT
Integral
Heating · Cooling
- M-Bus
- wM-Bus
- ENE
Digitermo
Heating · Allocator
- M-Bus
- wM-Bus
- ATS
Atlas
Water
- M-Bus
- wM-Bus
- QMT
Qmet
Heating · Allocator
- M-Bus
- wM-Bus
- SKY
Skyron
Heating · Allocator
- M-Bus
- wM-Bus
- ELM
Elektromed
Heating
- M-Bus
- wM-Bus
- FNF
Calmet
Heating · Cooling
- M-Bus
- wM-Bus
- FNF
Polimeter
Heating · Allocator
- M-Bus
- wM-Bus
- TKS
Teksan
Heating · Water
- M-Bus
- wM-Bus
Brand names belong to their respective manufacturers and are used here only to show which devices are read.
Manufacturer code
An M-Bus telegram declares its manufacturer with three letters. When the label cannot be read on site, or the device is unfamiliar, that code identifies the brand for certain.
Some codes appear under more than one brand: LUG shows on both Siemens and Landis+Gyr devices, and ZRI on Zenner and Minol, which belong to the same group. In those cases the brand is resolved from the device type field of the telegram.
- QDSQundis
- ZRIZenner
- TCHTechem
- ISTista
- KAMKamstrup
- ZRIMinol
- DNFDanfoss
- EFEEngelmann
- LUGSiemens
- HYDSharky
- BYLBaylan
- CEMCEM / Yavuz Metal
- LUGLandis+Gyr
- HNYHoneywell
- SENSensus
- APAApator
- INTIntegral
- ENEDigitermo
- ATSAtlas
- QMTQmet
- SKYSkyron
- ELMElektromed
- FNFCalmet
- FNFPolimeter
- TKSTeksan
Protocol comparison
See which brand is read over which path in one table. Different models of the same brand may carry different protocols.
| Brand | Manufacturer code | Meter type | M-Bus | wM-Bus | RF | LoRaWAN | RS-485 |
|---|---|---|---|---|---|---|---|
| Qundis | QDS | Heating · Water · Allocator | |||||
| Zenner | ZRI | Heating · Water | |||||
| Techem | TCH | Heating · Water · Allocator | |||||
| ista | IST | Heating · Water · Allocator | |||||
| Kamstrup | KAM | Heating · Cooling · Water | |||||
| Minol | ZRI | Heating · Water · Allocator | |||||
| Danfoss | DNF | Heating · Cooling | |||||
| Engelmann | EFE | Heating · Cooling · Water | |||||
| Siemens | LUG | Heating · Cooling | |||||
| Sharky | HYD | Heating · Cooling | |||||
| Baylan | BYL | Water | |||||
| CEM / Yavuz Metal | CEM | Water | |||||
| Landis+Gyr | LUG | Heating · Electricity | |||||
| Honeywell | HNY | Heating · Water | |||||
| Sensus | SEN | Heating · Water | |||||
| Apator | APA | Heating · Water | |||||
| Integral | INT | Heating · Cooling | |||||
| Digitermo | ENE | Heating · Allocator | |||||
| Atlas | ATS | Water | |||||
| Qmet | QMT | Heating · Allocator | |||||
| Skyron | SKY | Heating · Allocator | |||||
| Elektromed | ELM | Heating | |||||
| Calmet | FNF | Heating · Cooling | |||||
| Polimeter | FNF | Heating · Allocator | |||||
| Teksan | TKS | Heating · Water |
Compatible meters
Devices our meter tools work with
- Qundis
- Zenner
- CEM / Yavuz Metal
- Digitermo
- Calmet
- Polimeter
Module configuration available — see the meter tools
Compatible meters
Why we work brand-independently
No need to replace meters
Whatever brand is installed on a site you take over, you continue with it. Moving to remote reading does not mean pulling out the building's meters.
Mixed brands on one project
Qundis in one block and Zenner in another is not a problem; all of them read into the same panel and the same cost allocation.
No lock-in to manufacturer software
Changing meter brand does not mean changing software. The archive and the billing side stay the same.
Adding a brand is straightforward
For a device not on the list we examine its telegram and confirm whether it can be read; if it can, it joins the list.
Questions
Do we read the meter you already have?
My brand is not on the list — can you read it?
Most likely yes. What matters is not the brand but whether the device produces a telegram conforming to EN 13757. Send us the model and we will check the telegram structure and give you a definite answer.
My meters have no module — can they still be read remotely?
A mechanical meter without a module cannot be read remotely. In that case either a communication module is fitted, or the meter is read with the field app; both feed the same panel and the same bill.
My wireless meters are encrypted — is that a problem?
No. Once the AES key is registered, the encrypted wM-Bus telegram is decoded and read. The key comes from whoever sold or installed the meter.
How is billing calculated when a project has several brands?
Brand does not affect the calculation. Wherever the reading comes from it lands in the same archive, and cost allocation is calculated in one place under the regulation's order.
Do you read electricity meters too?
Yes. On electricity meters read over RS-485 / Modbus, fields such as voltage, current, active-reactive power and power factor can be collected alongside the index.
Send us your meter model and we will answer precisely
Get in touch with the brand and model; we will confirm which protocol the device is read over, whether a module is needed and how it would be installed on your project.